KAre™ - Katsa remote

TM KATSA remote KA re Katsa Oy Tampere, Finland Tel +358 3 315 151 katsagears@katsa.fi www.katsa.fi/en Communications and positioning GPRS 900/1800 MHz (Europe) UMTS 900/2100 MHz (Europe) GPS/GLONASS External GPS/GPRS antenna WLAN Electrical properties Operating voltage Typical operating current Peak operating current (< 1 s) Internal fuse Analogue input voltage range from 0 to Internal battery Enviroment Full performance temperature range Degraded communication IP class Interface Main connector Connector pin coating Multifunctional AI/DI pins Multifunctional AI/DI/pulse pins Pulse sensor input pins DI pins 1-wire temperature sensors CAN bus connection Maximum number of IEPE vibration sensors Communications power-up pin KA re Basic x x x optional KA re Basic 6.8 ... 32 VDC < 100 mA 1000 mA 3 A 5 V Li-Po 200 mAh KA re Plus 8 ... 32 VDC < 100 mA 1000 mA 3 A 5,-10,-20,-40 V Li-Po 200 mAh opt. 1700 mAh KA re Plus Vibro 19.2 ... 28.4 V < 300 mA 1200 mA 3 A 5,-10,-20,-40 V Li-Po 200 mAh opt. 1700 mAh KA re Basic -30 - +70 °C -40 - +85 °C 67 KA re Plus -30 - +70 °C -40 - +85 °C 67 KA re Plus Vibro 0 - +70 °C - 67 KA re Basic AMPSEAL 35 Gold - 2 - - 12 x - 1 KA re Plus AMPSEAL 35 Gold 4 - 2 12 12 x - 1 KA re Plus Vibro AMPSEAL 35 Gold 3 - 2 12 12 x 4 1 KA re Plus x x x optional optional KA re Plus Vibro x x x optional optional Note: Maximum number of pulse, analogue and position sensors depends on the KAre model and the other sensor choices as some of the IOs are multi-functional. Technical details

RkJQdWJsaXNoZXIy NDczNTY=